TM-2T
Twin Tuner HD Satellite Receiver

  • Image 1
  • Image 2

Highlights

  • Full HD 1080p & 3D Ready
  • 2x HD Satellite (DVB-S2) Tuners
  • 405MHz Broadcom Dual Core MIPS Processor
  • Linux Open Embedded
  • Internal 2.5” Hard Disk Drive Support, 3x USB Ports
  • 1x Smart Card Reader
  • Ethernet Port

  

With the TM-2T, you can watch satellite channels in glorious High-Definition (HD), Full HD 1080p with Dolby Digital Plus to give you a superior audio experience. It’s also 3D ready*.

It is an Open Embedded satellite receiver which has Third Party Software to give you plenty more functions than a standard satellite receiver.

Not leaving the Standard Definition (SD) channels behind, we’ve developed a built-in hardware Upscaler to improve the picture quality of Standard Definition (SD) channels via the HDMI output.

You can use a USB Hard Disk Drive (HDD) or an internal 2.5" Hard Disk Drive to record all your favourite channels, listen to your music and watch a slideshow of your photos.

The luxurious Vacuum Fluorescent Display (VFD) front panel displays: channel names, recording status, playback status...and more (display may vary to the above).

To watch the same channel on another TV, there’s an RF modulator at the rear of the satellite receiver, so you can watch all your channels in your bedroom (requires a cable to be connected from the RF modulator to the second TV).

The silent temperature and speed controlled fan cools the TM-2T only when needed and the speed level can also be adjusted.

It’s even Eco-friendly with 1W standby power consumption.

For further information about this product, please click on the Features and Specifications tabs.

*not all 3D formats are compatible & requires a 3D TV

  • Fully MPEG-2, MPEG-4 & H.264 Compliant
  • DVB-S & DVB-S2 Complaint
  • 2x HD Satellite (DVB-S2) Tuners
  • 405MHz Broadcom Dual Core MIPS Processor
  • 1024 MB NAND Flash, 8 MB NOR Flash, 384 MB RAM
  • Linux Open Embedded
  • Output Resolution: Full HD 1080p, 1080i, 720p, 576p, 576i & 3D Ready*
  • 1x Smart Card Reader
  • HDMI Output
  • Dolby Digital Plus compliant via optical S/PDIF output
  • Internal 2.5” Hard Disk Drive Support
  • 3x USB 2.0 Ports (1x front and 2x rear)
  • Ethernet Port
  • Vacuum Fluorescent Display (VFD) to display channel names, status, etc
  • Temperature & Speed Controlled Fan
  • Unlimited Channel Memory
  • Scart Output with RGB and CVBS support
  • Super sensitive tuner for very weak signals and weak transponders
  • Less than 1 second channel change
  • DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible
  • PLL type RF-Modulator (Ch. 21- 69) and UHF tuning function
  • Extended EPG and programme reservation on EPG
  • Support for multiple audio language broadcasts
  • Supports PAL/NTSC systems
  • Parental Control
  • SCPC & MCPC receivable from C/Ku band satellites LNBs supported: Universal, Single, Single S & C band wideband LNBs
  • 4:3 & 16:9 screen formats
  • Timer & multi-event timer functions
  • Automatic FEC and PID detection and manual entry of PID values
  • Real time clock
  • Teletext & Subtitle support by OSD and VBI
  • LNB short circuit protection onboard
  • 1W Standby power consumption option

*not all 3D formats are compatible & requires a 3D TV

 

System:
Video Decoder:
MPEG-2, MPEG-4 HD, H.264, PAL, NTSC
Audio Decoder:
MPEG-1/2, Dolby Digital Plus AC3 Audio
Tuner:
2x DVB-S2
High-Definition HD:
1080p, 1080i, 720p, 576p, 576i
CPU:
405MHz
SDRAM / Flash:
1024 MB NAND Flash, 8 MB NOR Flash, 384 MB RAM
Front:
Front Display:
Vacuum Fluorescent Display (VFD)
Front USB:
1
Smart Card Reader:
1
Common Interface (CI) Slot:
X
Rear:
Video Interface:
HDMI, 1x TV Scart (RGB, CVBS), RCA
Audio Interface:
Optical S/PDIF
Ethernet Interface:
10/100Mbps
Rear USB:
2x USB 2.0
RF Modulator:
CH21-69, PAL-I/G/K/M, NTSC
Internal SATA Support:
O
Fan:
Temperature & Speed Controlled
Power Supply:
Input Voltage:
AC 100~240V, 50/60Hz
Standby Consumption:
Under 1Watt
Others:
Size (WxHxD):
300x60x220 (mm)
Weight: